Tulsa, Oklahoma

Tulsa Water Quality

Tulsa drinks treated water from three northeastern Oklahoma lake systems. The 2026 report (2025 data) shows low lead, byproducts under their limits and farm-country traces like atrazine far below the standard.

Tulsa water sourcesTulsa's 2026 Water Quality Report lists Lake Oologah, Lakes Spavinaw and Eucha, and Lake Hudson as its sources.Lake OologahVerdigris RiverRogers/Nowata countiesSpavinaw & EuchaSpavinaw CreekMayes/Delaware countiesLake HudsonNeosho RiverMayes CountyMohawk + A.B. Jewell plantsMeets all standardslead 90th 1.20 ppb · TTHM LRAA 39 ppb
Diagram of the sources listed in the City of Tulsa's 2026 Water Quality Report, not a service-area map.
Clear drinking water pouring into a glass

Oologah · Spavinaw/Eucha · Hudson · lead 90th 1.20 ppb, 0 over AL · TTHM LRAA 39 ppb (limit 80) · atrazine RAA 0.378 ppb (limit 3) · UCMR5: no PFAS detected.

The short answer

Tulsa's tap water comes from Lake Oologah, Lakes Spavinaw and Eucha, and Lake Hudson, treated at the Mohawk and A.B. Jewell plants. The city's 2026 report, covering 2025, shows every listed contaminant in compliance, with a lead 90th percentile of 1.20 ppb.

Trihalomethanes peaked at a locational running annual average of 39 ppb against 80. Federal PFAS screening in 2023 found no detectable PFAS.

Get a free test

Tell us your Tulsa address. We confirm coverage first, then schedule a licensed technician to test at your tap — no charge, no obligation.

What the 2026 Tulsa report shows

System-level results for samples collected in 2025, from the City of Tulsa's 2026 Water Quality Report. A later report supersedes them.

Lead 90th percentile: 1.20 ppb

Lead results ranged from 0 to 3.98 ppb, with a 90th percentile of 1.20 and no sites above the 15 ppb action level. Copper's 90th percentile was 0.304 ppm against 1.3. The city tests 50 customer taps a year and will provide a filter pitcher if a home exceeds the action level.

Byproducts under their limits

Total trihalomethanes had a highest locational running annual average of 39 ppb (individual results 13 to 56) against 80, and haloacetic acids 24 ppb (5.1 to 36) against 60. Chlorite peaked at 0.251 ppm against 1.

Chloramine disinfection

Tulsa disinfects with chloramine. The highest running annual average was 2.5 ppm, with readings from 1.6 to 3.2, against a 4.0 ppm limit.

Atrazine, far below the limit

The farm herbicide atrazine had a highest running annual average of 0.378 ppb against a 3 ppb limit — a trace the report attributes to runoff from row crops.

Organic carbon removal

Total organic carbon removal averaged a ratio of 1.06 over the year, meeting the 1.00 requirement; March was the lowest month at 0.89. Organic carbon is what disinfection byproducts form from.

No detectable PFAS

The city completed EPA's fifth unregulated contaminant monitoring round (UCMR 5) in 2023, testing for 29 PFAS compounds and lithium, and reports no detectable levels of either.

Where the water comes from

Three lake systems feed two treatment plants.

Lake Oologah

On the Verdigris River in Rogers and Nowata counties. Residents in north and west Tulsa usually receive water from the Mohawk plant.

Lakes Spavinaw and Eucha

On Spavinaw Creek in Mayes and Delaware counties. Water reaches Tulsa through large transmission pipes from the lakes.

Lake Hudson

On the Neosho River in Mayes County. South and east Tulsa usually receive water from the A.B. Jewell plant; both plants can serve any part of the city.

What each residential filtration stage does for Tulsa waterSediment filtration catches particles. Activated carbon addresses chlorine disinfection byproducts and taste. An ion-exchange softener addresses hardness from calcium and magnesium. Reverse osmosis at the tap addresses dissolved inorganics such as lead, arsenic and chromium. No stage does all of these jobs.What filtration does — stage by stageEach stage solves a different problem. None of them solves all of them.Sedimentparticles, gritnot dissolvedmineralsCarbonTTHM, HAA5,taste & odournot arsenicNa⁺ ↔ Ca²⁺Softenerhardness(Ca / Mg)not contaminantsRO at the taplead, arsenic,chromiumnot whole-houseMatching the stage to the finding is the point of a tap testNo removal percentages invented here — a citywide CCR is not your tap.
Stages are sequential options, not a required stack. A softener does not remove arsenic; carbon does not soften; RO at the sink does not protect the water heater. Diagram, not a product claim.

Water and power in Tulsa

If you are also weighing backup power, our Tulsa battery backup page covers PSO's time-of-day rates and recent storm outages. Down the turnpike, Oklahoma City's water comes from a different set of lakes — Hefner, Atoka and Draper — with its own report.

To the north, Kansas City, Kansas draws from Missouri River wells and has some of the hardest water in this group of cities.

Where these figures come from

Everything on this page traces to the City of Tulsa's 2026 Water Quality Report, covering January 1 to December 31, 2025, published for the Tulsa Metropolitan Utility Authority.

Matching treatment to the finding

Taste, byproducts and your own service line drive most Tulsa decisions.

Catalytic carbon for chloramine

Chloramine is harder for ordinary carbon to remove than chlorine. A catalytic carbon filter is the usual choice when disinfectant taste or odor is the complaint.

Carbon or RO for byproducts

Trihalomethanes are under the limit, but activated carbon or reverse osmosis at the kitchen sink lowers them further for households that want that.

Check your service line

The True Reads program is identifying service line materials during meter change-outs for 145,000 residential customers. If your line is listed as unknown, the city sends an annual notice until it is identified.

Hardness: test it

The 2026 report does not list hardness. If scale is building on fixtures or the water heater, a hardness test at the tap decides whether a softener makes sense.

How the free test works

A licensed technician tests at your kitchen tap, walks the plumbing, and tells you which of the findings above applies to your house and which does not. There is no charge and no obligation.

Seamless Home is the licensed contractor of record on the work that follows. Installation is performed by vetted installing partners engaged as our subcontractors, and the workmanship obligation stays with us. Coverage is confirmed per service area rather than promised as blanket availability.

What a water treatment job with us covers

Installation and replacement of whole-home and point-of-use treatment, specified against what your water actually contains.

  • Sediment filtration

    Installation of the first stage that protects everything downstream of it, sized to the service line and the household draw.

  • Softening

    Installation of ion-exchange softening where hardness is the problem, including the drain connection the plumbing code treats as indirect waste.

  • Carbon filtration

    Installation of carbon stages for taste, odour and disinfection by-products, specified from your utility's own water quality report.

  • Reverse osmosis

    Point-of-use installation at the kitchen sink where the target is dissolved solids rather than whole-home flow.

  • Disinfection

    Installation of UV or equivalent treatment where the supply is a private well or is otherwise not continuously disinfected.

  • System replacement

    Replacing equipment that has reached the end of its service life, including the discharge and air gap details an inspector looks at.

This is installation and replacement work, specified from a published water quality report or a test of your supply — not from a sales chart. Coverage is confirmed per service area rather than promised as blanket availability.

What the work actually looks like

Treatment equipment is plumbing. Most of the job is the connection, the drain and the code detail behind it.

A worker's hands tightening threaded pipe fittings on supply pipework beneath equipment
The connection and the discharge are where a treatment install passes or fails inspection.
An adult handing a glass of water to a child across a kitchen counter
The point of the equipment is the tap. What it has to remove is decided by what your supply actually contains.
Two people in work clothes reviewing plans on a tablet inside a house under renovation
Scope agreed in writing before work starts — what is included, what is not, and who is accountable for it.

Tulsa water, answered plainly

Where does Tulsa get its water?+

From three lake systems in northeastern Oklahoma: Lake Oologah on the Verdigris River, Lakes Spavinaw and Eucha on Spavinaw Creek, and Lake Hudson on the Neosho River. It is treated at the Mohawk and A.B. Jewell plants.

Is Tulsa tap water safe to drink?+

The city's 2026 report, covering 2025, lists every detected contaminant as in compliance. The closest results to a limit were trihalomethanes, at a highest locational running annual average of 39 ppb against 80.

Is there lead in Tulsa water?+

The lead 90th percentile was 1.20 ppb, with results up to 3.98 ppb and no sites above the 15 ppb action level. Lead mainly comes from service lines and home plumbing, so one house can differ.

Does Tulsa water have PFAS?+

The city tested for 29 PFAS compounds under EPA's UCMR 5 program in 2023 and reports no detectable levels.

Which plant serves my house?+

Usually Mohawk for north and west Tulsa and A.B. Jewell for south and east Tulsa, with both serving central areas. Either plant can serve any part of the city when demand requires.

Where do these figures come from?+

From the City of Tulsa's 2026 Water Quality Report, covering January 1 to December 31, 2025. Third-party aggregators are not used.

Get a free test at your tap

A licensed technician tests at your kitchen tap and tells you which Tulsa findings apply to your house — chloramine, disinfection byproducts, hardness or lead from plumbing. No charge, no obligation, and coverage confirmed at your address first.

Get a free test